Practice HPE6-A66 Exam Online

Question 1

Which feature does the Aruba AP 555 support? (Select two.)

A : 802.11ac and lower standards only

B : desk wall plate mounted

C : three radios

D : weather proof and temperature hardened

E : high density indoor locations

Answer: A

Question 2

A network architect will be using VisualRF to determine the appropriate wireless coverage for a new wireless design. Seamless, uninterrupted roaming is necessary for this design, since voice will need to be supported. Given these requirements, which information should be used in VisualRF to plan a cost effective solution that meets these requirements?

A : Minimum -70db, 1 AP per 2,500 square feet, capacity design

B : Minimum -65db, 1 AP per 2,500 square feet, high density design

C : Minimum -80db, 1 AP per 1,000 square feet, very high-density design

D : Minimum -70db. 1 AP per 5,000 square feet, high density design

Answer: B

Question 3

A network architect is designing a new wired and wireless solution for for a company. The company has two

buildings on a campus, which each building has three floors. The campus core will be placed in the basement

of Building 1. Each wiring closet has eight strands of multi-mode OM3 grade fiber that connect to a wiring

closet of the first floor of the building it is contained, referred to as a main distribution frame (MDF). The

maximum distance between a floor's wiring closet and the MDF is 100 feet (30 meters). The maximum

distance between the two MDFs and the campus core is no more than 150 feet (45 meters). There are eight

strands of multi-mode OM3 grade fiber from these two MDF closets to the campus core.

Based on this information, which type of design should be used and what is the maximum speeds supported all

uplinks for the existing the multi-mode fiber?

A : three-tier and 10 Gbps

B : three-tier and 40 Gbps

C : two-tier and 10 Gbps

D : two-tier and 40 Gbps

Answer: A

Question 4

A network architect imports a floorplan defined in a PNG file format What is the function of the measurement tool in Aruba's VisualRF?

A : Define the appropriate dimensions of each object in a Floorplan View

B : Define the appropriate dimensions of a Floorplan and Building View

C : Define the appropriate dimensions of a Floorplan View

D : Define the appropriate dimensions of each room in a Floorplan View

Answer: A

Question 5

A customer has some employees that travel to various locations, where these employees will need Wi-Fi

access at these locations. Because many of these locations do not have wireless support, the employees will

need to carry an AP solution with them. Internet connectivity, if it doesn't exist at these locations, will be

provided by a national phone company USB wireless card which will be connected to AP. The wireless

solution needs minimal bandwidth, but needs to minimally support 802.1 lac wave 1 devices.

Which Aruba AP wireless solution would meet the needs of these employees most effectively and cost

efficiently?

A : 318

B : 303H

C : 365

D : 203R

Answer: D

Name:	Aruba Certified Design Associate
Exam Code:	HPE6-A66
Certification:	HP Aruba
Vendor:	HP
Total Questions:	60
Last Updated:	Apr 22, 2024

HP HPE6-A66